Controllers and Editors for Synths, Keyboards and Effects

Synth Editors standalone and plugin format Mac and PC for Roland RD88, JU06A, SH01A, Oberheim TEO-5, Behringer UB-Xa, TC M350 JU06A : RD-88 : SHO1A : Pro Solo MK3   TC M350 : UB-Xa : TEO-5 I thought it would be useful to create a single post for my CTRLR panels. There are  Mac and a PC versions: Mac Editors tested up to OS 15 Catalina - reports from users that it works on later Macs PC Editors tested and working on Windows 7  and 10 Mac AU component tested in Live 10 and Logic 10.6  Mac VST created in Reaper tested on Cubase AI 10.5 and Live 10 (Plugins are not compatible with later Macs) Mac Installation Note : if you get the message that the app is from an unknown developer and can't be opened got the Security panel in System Preferences and grant access:  On Windows you will have to allow it to run because the editor has not been verified by Microsoft. Just select More Info and then follow the prompts. Oberheim TEO-5  More info here    Beh...

Behringer 2-XM Polyphonic Controller This was the first iteration of the four voice controller for the Behringer 2-XM. It has now been superceded byt the Eurorack version which supports 10V outputs.    The 2-XM is based on the Oberheim SEM which was the synth module that was in the famous FVS (Four Voice Synthesiser) from 1978. I was lucky enough have one of these (courtesy of the record company!) and used it for live and recording until the mid 80s when it died! I still have one of the modules but the rest is long gone. I had given up all hope of ever replacing it until Behringer announced 2-XM which is a faithful but smaller recreation of the modern SEM (2000s). Each 2-XM is actually 2 SEMS  - can you see why it's called the 2-XM ;)  so if you have 2 units and a controller you would have the equivalent of the mighty FVS. Here is the finished prototype.... FVC connected to 2 x 2-XMs for a four voice system Short demo of the FVC features  2-XM Controller Feature...

 Introduction The TEO-5 editor was built using CTRLR 5.3.198 for Mac and on PC. The Mac versions have been tested on Catalina 10.15 but users of later Macs report it runs as a standalone app on M1 and later. The plugins do not run on Silicon. PC versions have been built on Windows 7 and tested on Windows 10. Special thanks to  RomanKubiak  who developed CTRLR. The editor is free and without warranty. I accept no liability for loss or damage. However, MIDI messages are unlikely your damage your synth and you can always do a firmware reset if you have problems. Installation MIDI Setup Global Settings The editor uses SYSEX and NPRN commands so these must be enabled: 1 Global menu 2 Select the following parameters: 18 - MIDI ParamSend NPRN 19 - MIDI ParamRcv NPRN 20 - MIDI Control On 21 - MIDI Sysex On 22 - MIDI Sysex Cable USB 23 - MIDI Select Out All 24 - MIDI Prog Snd On 25 - MIDI Prog Rcv On Some of these settings are on by default but worth checking.

Behringer UB-Xa Editor    Latest version UB-Xa VX Update  Just a cosmetic update with a better layout that fits on 2 screens. Everything needed to edit a patch is now on the first screen. The second is for Atrophy and Globals. Enjoy!   Mac versions were built on an iMac running Catalina. Plugins tested with Live 10, Logic 10.6 and Cubase LE 10.5. The plugins were compiled using Reaper. Users report that the standalone app works on later M1 Macs but the  plugins do not. YMMV   PC version is standalone only and has been tested on Windows 10    Downloads All files have been scanned with AVG Antivirus. The editor is free and comes with no warranties. Play at your own risk. You will need to grant access in Security and Privacy on the Mac as I am unknown developer :( UB-Xa VX Mac Standalone   UB-Xa VX Mac VST     UB-Xa VX Mac AU   UB-Xa PC Standalone    

 Introduction The Mac versions have been tested on Catalina 10.15 but users of later Macs report it runs as a standalone app on M1 and later. The plugins do not run on Silicon. PC versions have been tested on Windows 10. Special thanks to  RomanKubiak  who developed CTRLR. The editor is free and without warranty. I accept no liability for loss or damage. However, MIDI messages are unlikely your damage your synth and you can always do a factory reset if you have problems. Latest Version =  5.188 UB-Xa PC Standalone UB-Xa Mac Standalone GETTING STARTED Editor Settings The first time you load the editor you need to set the MIDI ports. Use the MIDI menu to select UB-Xa Input on ALL Channels (CH:0) Output on Channel 1 (CH:1).  You may need to click  Refresh Devices in the MIDI menu. Quit and reload the editor if there is no communication as this should also refresh the MIDI ports. You can check MIDI is working by moving a knob on the UBXa.  The correspondin...

Oberheim TEO-5 Editor CTRLR Editor for TEO-5 New Version VX Stripped down version with everything you need to edit a patch on one page!       Mac versions were built on an iMac running Catalina. Plugins tested with Live 10, Logic 10.6 and Cubase LE 10.5. The plugins were compiled using Reaper. Users report that the standalone app works on later M1 Macs but the  plugins do not. YMMV   PC version is standalone only and has been tested on Windows 10      TEO-5 VX PC Standalone     TEO-5 VX Mac Standalone     TEO-5 VX Mac AU     TEO-VX Mac VST       Latest news and info are in the comments section Setup  On the MAC you may need to grant access in the Security and Privacy of System Preferences because I am not a registered Apple Developer Once the Editor is loaded set up your MIDI devices The editor uses NRPNs and Sysex to transmit and receive data so those these must be enabled in the TEO-5 Gl...

 E-mu the company - Emulator the sampler No need to cover the background and history behind E-mu but I will quote this anecdote: Dave Rossum and Scott Wedge were the founders of E-mu and by 1980 they had a prototype Emulator 1 but still didn't have a name for it other than the sampler. So one day Rossum asked everyone to go home and come back the next day with some ideas. Ed Rudnick came in the next day with a big smile on his face and announced that he had found the name Emulator. He had found it after looking through the thesaurus. Considering the match with the company name it was amazing and Wedge said a lot of people thought the name of the company was Emulator. Links Emulator Archive     The Emulator Archive was founded in July 1999 to preserve the legacy of music technology created by E-mu Systems. The Emulator Archive has comprehensive information on all vintage E-mu Systems products to enable owners to continue to enjoy the amazing technology, and to create new m...

Roland RD88 Editor Panel This is a free stand alone editor built using CTRLR. Tested on Mac 10.15  Catalina and Windows 7 and Windows 10. Users tell me that my editors also run on later M1 Macs. Let me know in the comments if you can confirm this. I found a post on VI.Control from a user saying it works fine on his Mac running Sonome. Good to know! Features: Fast recall of all Scene parameters including Common, Tones, Zones and effects Rename scenes - you still have to remember press "Write" to store on RD88 Handy buttons for creation of Splits and Layers Mute buttons for each Tone Over 3000 tones are accessible from the Tone Tabs Standalone versions for Mac and PC  Here's a link to the video demo. RD88 Demo Video Part 1/2 RD88 Demo Video Part 3 Download Links RD-88 Mac RD-88 AU Plugin  does not run in Logic 10.6 RD-88 VST Mac RD-88 PC RD88 editor running as AU component You can edit all the 90 MFX effects BUT I have only added the parameter names and ranges for the ...

UB-Xa Edit V2 - DISCONTINUED  Update - new version is here  UB-Xa V5 ARCHIVED Behringer have just released a firmware update V2.0 ( 000.003.117).  This includes new features which changes some of the Sysex Data. Latest version is 1.63and has a couple of important bug fixes that were affecting Local Control menu. This release has an updated Atrophy Page and code so Presets will recall stored Atrophy settings.  Version 1 - History Patch Editor Matrix Editor New Atrophy Page Windows Version Setup: The App is not signed so Mac Gatekeeper will probably throw up a dialog that this is from an unknown developer. Just load Security and Privacy from System Preferences and select Open Anyway. You only have to this on first run. From the MIDI menu set you MIDI IO.  You may need to reload the app so the MIDI devices are refreshed: MIDI IN = UB-Xa MIDI OUT = UB-Xa CONTROLLER = NONE The editor uses NRPN messages so you need enable these in the UB-Xa menus. The editor will auto...