Patches and tips for the Behringer 2600

Here are some simple mods and ideas that I have found useful

  • CV and Gate setup - coming soon
  • Ext Clock In - tip
  • Stereo Pan patch
  • Octave + / - patch using filter feedback patch
  • Bandpass patch - coming soon
  • Notch patch- coming soon

External Clock Fix 

 Maffez 2600 Mods 

I used one of his mods for the External Clock In. WIthout the mod the External Clock input does not work unless you only push the jack in halfway. Not an ideal soultion as the slightest wiggle and it won't work. But Maffez has a an easy mod for this:

Carefully cut the trace with a sharp knife, solder a 1K resistor

Auto Pan Patch

 

After this mod the External Clock input works as expected. Below is an example of using it to sync panning to the external clock or any pulse eg Gate On. 

Filter feedback patch 

 I can't remember who I got this from but it is a very interesting effect. When setup correctly you will hear the pitch shift down by an octave then return to the original pitch. It's slightly randon but is similar to PWM but it affects the frequency rather than PW:

Octave + / - patch using filter feedback patch

 


Comments

Post a Comment