The Pro Micro

How to get the projects

If you are interested in building any of these projects please contact me for details. I don't supply any parts but you can buy the Arduino sketches and a full set of instructions to build the project yourself from £10 . You will get circuit diagrams, PCB layout and a complete parts list for UK suppliers. If you are in the UK I can provide a pre-programmed and pre-soldered Pro Micro for around £20 plus postage. You can contact me via the comments sections. Alternatively, email me at gmail - my name is chaz riff but without the space ;)

Behringer 2-XM Polyphonic Controller

This is the latest project - a four voice controller for the Behringer 2-XM. This is based on the Oberheim SEM which was the synth module that was in the famous FVS (Four Voice Synthesiser) from 1978. This project uses 2 Pro Micros connected via the TX and RX pins. I needed 2 because it requires 32 ins and outs.

Low Cost Polyphonic Keyboard Controller for mono synths

A much simpler and cheaper alternative to the 2-XM controller. Very cheap to build and still has an on board polyphonic ADSR. All controls are handled with CCs from you controller keyboard. You could run this with a 2-XM, a Pro-1 and a Model D for an interesting system.