UB-Xa Edit V2 - Released
Behringer have just released a firmware update V2.0 (000.003.117). This includes new features which changes some of the Sysex Data. Latest version is 1.15 and has a couple of important bug fixes that were affecting Local Control menu.
Right here is V2 for Mac only - tested on Catalina:
The stand alone editor should work on newer M1 macs but the plugins are not compatible.
 |
| Patch Edit |
The App is not signed so Mac Gatekeeper will probably throw up a dialog that this is from an unknown developer. Just load Security and Privacy from System Preferences and select Open Anyway. You only have to this on first run.
From the MIDI menu set you MIDI IO. You may need to reload the app so the MIDI devices are refreshed:
MIDI IN = UB-Xa
MIDI OUT = UB-Xa
CONTROLLER = NONE
The editor uses NRPN messages so you need enable these in the UB-Xa menus. The editor will automatically update these settings on load once you have the MIDI I/O setup.
From USB//MIDI menu select Local CTRL and scroll to USB NPRNTx and enable
You can also enable Program Change RX/TX here too
From the USB/MIDI menu select USB CTRL and enable TX/RX NRPN.
OLD VERSIONS FOR FIRMWARE V1
UPDATE V2.1xx - Old version for original firmware
I've updated the editor with some Sysex routines You can load Banks into the editor and recall each patch for editing. You still have to press Write on the synth to save your Patch. Full editing of Atrophy including Sysex dump from the synth. Please note this version is Mac only.
This will be the last update for a while. It has been an interesting project and the UB-Xa is a powerful synth. I think Behringer just need to develop a Vintage Knob like Sequential did. The Atrophy is very complex and doesn't hit the sweet spot that a simple Vintage Knob does.
V2.196 Updated 16th July 2024
Mac OSX Standalone
UB-Xa Sysex Editor
Mac OSX Plugins
UB-Xa Sysex Editor AU component
UB-Xa Sysex Editor VST Copy to VST folder inside Plugins folder
Update History V2.xxx
New Application Icon!
Fixed OSC2 Transpose control to step in semitones
Sysex dumps to the editor - select Globals/Sysex/ Bank A B C or D
Atrophy editor complete with SysEx Data received from the synth
Fixed a few controls
Tidied up the panel
Added more Arpeggiator controls
I have used a font called Adelon which is similar to the UB-Xa font. If you don't have the font it will be replaced with Sans Serif.
 |
| AU Component |
 |
| VST |
Setup:
The App is not signed so Mac Gatekeeper will probably throw up a dialog that this is from an unknown developer. Just load Security and Privacy from System Preferences and select Open Anyway. You only have to this on first run.
From the MIDI menu set you MIDI IO. You may need to reload the app so the MIDI devices are refreshed:
MIDI IN = UB-Xa
MIDI OUT = UB-Xa
CONTROLLER = NONE
The editor uses NRPN messages so you need enable these in the UB-Xa menus
From USB//MIDI menu select Local CTRL and scroll to USB NPRNTx and enable
You can also enable Program Change RX/TX here too
From the USB/MIDI menu select USB CTRL and enable TX/RX NRPN.
PC Downloads - Version 1
PC Vst3 Plugin - Doesn't work for me in Reaper on a Windows 7 VM but YMMV
PC version was compiled on a virtual machine running Windows 7 Home. Not tested as I don't have PC.
Update History
V1.50
Atrophy Lock On/Off corrected - On is now locked!
Atrophy Lock Info added
GNARLY and BRIGHT menu fixed
Corrected some Atrophy factory values
Good to know
Pan
You have to unlock Atrophy to adjust Panning but be aware that this is saved in the current Atrophy. So it would be possible to store 8 different pan settings in the Atrophy profiles.
Preset Volume
Shift + Volume will adjust the Preset volume for a patch. Remember to save the patch!
Comments
Also, you have 2 controls labeled 'OSC1 Freq' ( ;) )
Thanks
Also, one of your mod matrix sources is mispelled ('EnvoudnessSustain').
Thanks again.