Controllers and Editors for Synths, Keyboards and Effects

The Pro Micro  How to get the projects If you are interested in building any of these projects please contact me for details. I don't supply any parts but you can get the Pro Micro and other parts from eBay etc.  You can contact me via the comments sections. Alternatively,  email me at  gmail - my name is chaz riff but without the space ;) Behringer 2-XM Polyphonic Controller This is the latest project - a four voice controller for the Behringer 2-XM. This is based on the Oberheim SEM which was the synth module that was in the famous FVS (Four Voice Synthesiser) from 1978. This project uses 2 Pro Micros connected via the TX and RX pins. I needed 2 because it requires 32 ins and outs.        FVC connected to 2-XMs More info  here Low Cost Polyphonic Keyboard Controller for mono synths A much simpler and cheaper alternative to the 2-XM controller. Very cheap to build and still has an on board polyphonic ADSR. All controls are handled with CCs f...

Behringer 2-XM Polyphonic Controller This was the first iteration of the four voice controller for the Behringer 2-XM. It has now been superceded byt the Eurorack version which supports 10V outputs.    The 2-XM is based on the Oberheim SEM which was the synth module that was in the famous FVS (Four Voice Synthesiser) from 1978. I was lucky enough have one of these (courtesy of the record company!) and used it for live and recording until the mid 80s when it died! I still have one of the modules but the rest is long gone. I had given up all hope of ever replacing it until Behringer announced 2-XM which is a faithful but smaller recreation of the modern SEM (2000s). Each 2-XM is actually 2 SEMS  - can you see why it's called the 2-XM ;)  so if you have 2 units and a controller you would have the equivalent of the mighty FVS. Here is the finished prototype.... FVC connected to 2 x 2-XMs for a four voice system Short demo of the FVC features  2-XM Controller Feature...

 Introduction The TEO-5 editor was built using CTRLR 5.3.198 for Mac and on PC. The Mac versions have been tested on Catalina 10.15 but users of later Macs report it runs as a standalone app on M1 and later. The plugins do not run on Silicon. PC versions have been built on Windows 7 and tested on Windows 10. Special thanks to  RomanKubiak  who developed CTRLR. The editor is free and without warranty. I accept no liability for loss or damage. However, MIDI messages are unlikely your damage your synth and you can always do a firmware reset if you have problems. Installation MIDI Setup Global Settings The editor uses SYSEX and NPRN commands so these must be enabled: 1 Global menu 2 Select the following parameters: 18 - MIDI ParamSend NPRN 19 - MIDI ParamRcv NPRN 20 - MIDI Control On 21 - MIDI Sysex On 22 - MIDI Sysex Cable USB 23 - MIDI Select Out All 24 - MIDI Prog Snd On 25 - MIDI Prog Rcv On Some of these settings are on by default but worth checking.

 Introduction The Mac versions have been tested on Catalina 10.15 but users of later Macs report it runs as a standalone app on M1 and later. The plugins do not run on Silicon. PC versions have been tested on Windows 10. Special thanks to  RomanKubiak  who developed CTRLR. The editor is free and without warranty. I accept no liability for loss or damage. However, MIDI messages are unlikely your damage your synth and you can always do a factory reset if you have problems. Latest Version =  5.188 UB-Xa PC Standalone UB-Xa Mac Standalone GETTING STARTED Editor Settings The first time you load the editor you need to set the MIDI ports. Use the MIDI menu to select UB-Xa Input on ALL Channels (CH:0) Output on Channel 1 (CH:1).  You may need to click  Refresh Devices in the MIDI menu. Quit and reload the editor if there is no communication as this should also refresh the MIDI ports. You can check MIDI is working by moving a knob on the UBXa.  The correspondin...

 E-mu the company - Emulator the sampler No need to cover the background and history behind E-mu but I will quote this anecdote: Dave Rossum and Scott Wedge were the founders of E-mu and by 1980 they had a prototype Emulator 1 but still didn't have a name for it other than the sampler. So one day Rossum asked everyone to go home and come back the next day with some ideas. Ed Rudnick came in the next day with a big smile on his face and announced that he had found the name Emulator. He had found it after looking through the thesaurus. Considering the match with the company name it was amazing and Wedge said a lot of people thought the name of the company was Emulator. Links Emulator Archive     The Emulator Archive was founded in July 1999 to preserve the legacy of music technology created by E-mu Systems. The Emulator Archive has comprehensive information on all vintage E-mu Systems products to enable owners to continue to enjoy the amazing technology, and to create new m...

UB-Xa Edit V2 - DISCONTINUED  Update - new version is here  UB-Xa V5 ARCHIVED Behringer have just released a firmware update V2.0 ( 000.003.117).  This includes new features which changes some of the Sysex Data. Latest version is 1.63and has a couple of important bug fixes that were affecting Local Control menu. This release has an updated Atrophy Page and code so Presets will recall stored Atrophy settings.  Version 1 - History Patch Editor Matrix Editor New Atrophy Page Windows Version Setup: The App is not signed so Mac Gatekeeper will probably throw up a dialog that this is from an unknown developer. Just load Security and Privacy from System Preferences and select Open Anyway. You only have to this on first run. From the MIDI menu set you MIDI IO.  You may need to reload the app so the MIDI devices are refreshed: MIDI IN = UB-Xa MIDI OUT = UB-Xa CONTROLLER = NONE The editor uses NRPN messages so you need enable these in the UB-Xa menus. The editor will auto...

MIDI Organ Drawbars   When Guido Scognamiglio (Zioguido, GSi) released the D9U drawbard kit on GM-Lab I ordered the kit and built it. It was my first experience of the programming an Arduino Pro Micro and thanks to his excellent code I was able to modify and improve the unit. I then went on to build many projects based on the Pro Micro. GM-LAB I sold the D9U then picked up a set of old Hammond MIDI drawbars so I was able to build a unit based on Guido's design. One thing I didn't like about the D9U was the tiny micro switch at the back of the unit. This was used to switch between 2 sets of drawbars. I realised that it would be easy to use a rotary switch instead and then change the code to allow the adjustment of 4 sets of drawbars. Th CCs for the drawbars are stored in an array: int CCMap[4][9] = { { 12, 13, 14, 15, 16, 17, 18, 19, 20},  // Upper B { 40, 41, 42, 43, 44, 45, 46, 47, 48 },  //  Upper A { 80, 81, 82, 83, 84, 85, 86, 87, 88 },  // Lower B { 50...

The Nord Electro 6D has a Fatar TP/80 keybed which is the same as organs like the Mojo 61. However, I was surprised at how stiff the action was. I ended up swapping the key springs with an M-Audio Keystation 61-ES. I think this might use the Fatar TP/9 synth keybed.  That reduced the Keydown by 10g - not huge but it feels a lot better for smears etc. The Prophet 6 uses a variant of the TP/9 There has been much interest in the UB-Xa and some people are unhappy with the lightness of the keyboard so here are my unscientific results: Model No 1ps 3.56g Weight in grams needed to move key from rest White Key Length mm C-C 1 octave mm Nord E6D 15p 53 To the LH edge of the C key Prophet 6 14p 49 136 164 UB-Xa 8p 29 136 164 Behringer Odyssey 6p 21 138 164 So the Electro  with  new springs is very close to the Prophet 6 but the UB-Xa is 20g lighter than the P6. It would definitely be worth replacing the springs if they are the same size as Fatars. They are easy to replace - just ca...

Simple MIDI USB Clock Converter for Analogue Sequencers Title says it all really. I have several analogue sequencers that I designed and built years ago and I clock them with a Kenton Pro Solo Mk3. This unit can switch the MIDI THRU port to SYNC24 mode to work with Roland Drum Machines. This is a great solution but does tie up my Kenton which uses with my Editor and needs MIDI THRU for 2 way comms. Features USB In 5V Reset Pulse Out 5V Clock Pulse Out Clock Divide control - 7 divisions Whole - Half - 1/4 - 1/8 - 1/16 1/4T - 1/8T - 1/6T Very simple project with few components Arduino and the Pro Micro  I realised it was a simple job to reprogram on of my Pro Micros to convert MIDI Clock and Stop/Start messages. I've used it for a few weeks and its a worker so I thought I build proper unit: Like my SYNC24 breakout box this will be mounted on the back of an existing 19" rack panel. More information about ordering and building  here Analog pulses are output on the clock jack conn...